Mitsubishi M80 series Connection And Set Up Manual page 146

M800S/M80 Series Connection and Setup Manual
4 General Specifications
(20) THERMISTOR (Thermistor input)
Thermistor can be connected to this connector.
CH1 CH2 CH3
1
2
3
4
CH1
1 FG
2 NC
3 Thermistor CH1
4 Thermistor CH1
CH7
1 FG
2 NC
3 Thermistor CH7
4 Thermistor CH7
<Cable side connector type>
Connector : 37104-2165-000FL
Recommended manufacturer : 3M
(a) Outline of the thermistor input circuit
Thermistor
Measurement temperature
Resolution
Accuracy
Thermal responsiveness (Note 1)
Disconnection detection function
(Note 1) This indicates the maximum measurable temperature change amount per unit time.
(Note 2) Do not connect any thermistor other than PT3C-51F-M2 made by SHIBAURA ELECTRONICS
CH4 CH5 CH6 CH7 CH8
CH2 CH3
FG FG
NC NC
Thermistor CH2 Thermistor CH3
Thermistor CH2 Thermistor CH3
CH8 CH9
FG FG
NC NC
Thermistor CH8 Thermistor CH9
Thermistor CH8 Thermistor CH9
Thermistor
Thermistor
Shield
-10.0 to +150.0 ℃
0.1 ℃
±1.5 ℃ (Measurement temperature -10 to +10 ℃ )
±1.0 ℃ (Measurement temperature +10 to +70 ℃ )
±1.5 ℃ (Measurement temperature +70 to +110 ℃ )
±2.0 ℃ (Measurement temperature +110 to +130 ℃ )
±2.5 ℃ (Measurement temperature +130 to +150 ℃ )
This varies depending on the setting of the parameter (#1334).
±10 ℃ /s (When the setting of #1334 is -1)
±20 ℃ /s (When the setting of #1334 is 0)
±45 ℃ /s (When the setting of #1334 is 1)
±90 ℃ /s (When the setting of #1334 is 2)
Provided
When the temperature change exceeds the described value, it cannot be measured correctly.
Co., Ltd.
CH9 CH10 CH11 CH12
CH4 CH5
FG FG
NC NC
Thermistor CH4 Thermistor CH5
Thermistor CH4 Thermistor CH5
CH10 CH11
FG FG
NC NC
Thermistor CH10 Thermistor CH11
Thermistor CH10 Thermistor CH11
THERMISTOR
3.3V
FG
109
CH6
FG
NC
Thermistor CH6
Thermistor CH6
CH12
FG
NC
Thermistor CH12
Thermistor CH12
ADC
IB-1501269-F