Mitsubishi M80 series Connection And Set Up Manual page 370

M800S/M80 Series Connection and Setup Manual
17 Setting the Hardware
When connecting to the operation panel I/O unit
Control unit
CJ71
J010
(Note 1) For FCU8-DX750, station No. 1 to 3 and 7 to 12 of 64 stations are occupied, and the extensible stations
are station No. 4 to 6 and 13 to 64.
(Note 2) For FCU8-DX760, station No. 1 to 4 and 7 to 12 of 64 stations are occupied, and the extensible stations
are station No. 5, 6 and 13 to 64.
(Note 3) For FCU8-DX761, station No. 1 to 5 and 7 to 12 of 64 stations are occupied, and the extensible stations
are station No. 6 and 13 to 64.
(Note 4) Refer to "17.6.4 PLC Device Assignment of Digital Signal (DI/DO)" for device No. assignment.
(Note 5) The maximum connectable number of remote I/O units is 32.
Operation panel I/O unit
FCU8-DX750: 1 to 3, 7 to 12
FCU8-DX760: 1 to 3, 7 to 12
FCU8-DX761: 1 to 3, 7 to 12
333
RIO occupied stations
Remote I/O 3ch
J210
Max.53 to 55 stations
Max. input: 1696 to 1760 points
Max. output: 1696 to 1760 points
Remote I/O unit
IB-1501269-F