Driveshaft - Factory Five Racing Mk4 Roadster Assembly Manual

Driveshaft

14mm wrench, thread locker
Driveshaft
Unpack the driveshaft and slip it up into the rear of the transmission. The most room to do this is
usually to hold the shaft just above the center section and come in from the driver's side.
The driveshaft bolts are in the box with the driveshaft and should have thread locker on them already. If
thread locker is not there, put a small bead on each bolt.
222
www.factoryfive.com 508-291-3443