Selecting The Calibrate Film Tab; Selecting The Calibrate Ribbon Tab - HID HDP5000 User Manual

3.4

Selecting the Calibrate Film tab

The two buttons for the Calibrate InTM Film tab are described.
• Calibrate button: Sends calibrate film command to Printer. Follow the instructions to
set up the Printer.
Help button: Launches help specific to this tab.
•
Step Procedure
1 Select the Calibrate Film tab.
a. Ensure that the InTM Film Cartridge is installed.
b. Ensure the Printer's Cover is closed.
c. Click Calibrate.
Note: The Printer's LCD will display CALIBRATE PASSED.
d. From the LCD display, click OK to complete the procedure.
3.5

Selecting the Calibrate Ribbon tab

The two buttons for the Calibrate Ribbon tab are described below.
• Calibrate button: Sends the Calibrate Ribbon Command to the Printer. Follow the
instructions to set up the Printer.
• Help button: Launches help specific to this tab.
Step Procedure
1 Select the Calibrate Ribbon tab.
a. Ensure that the Ribbon Cartridge is removed.
b. Ensure the Printer's Cover is closed.
c. Click Calibrate.
Note: The Printer's LCD will display CALIBRATE PASSED.
d. Click OK on the LCD display to complete the procedure.
Page 20 of 101
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
© 2012, 2013 HID Global Corporation. All rights reserved
July 2013