Figure 4 - Print Left Of Form - HID HDP5000 User Manual

3.7.2 Print Left of Form
From Advanced Settings, modify the Print Left of Form Setting.

Figure 4 - Print Left of Form

Step Procedure
1 Print the Alignment Card Self-test.
2 Adjust the Print LOF up or down until the border of the LOF Zero Line is showing on the edge of the
card as shown.
3 Measure the density square, as shown.
Adjust the image density to 66% ± 1%.
Page 24 of 101
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
© 2012, 2013 HID Global Corporation. All rights reserved
July 2013