Figure 3 - Advanced Settings - HID HDP5000 User Manual

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0

Figure 3 - Advanced Settings

Setting column: Displays the type of setting
•
Default column: Displays the default setting value
•
• Current column: Displays the current setting value
Change the Current value by clicking the field to activate the control and enter the new
value.
Apply button: Applies changed values.
•
Restore Defaults button: Restores default values.
•
3.7.1 Head Resistance
This value is factory set. If the main circuit board or the printhead is replaced, adjust this
number.
Locate the Printhead Setting Number on the bottom of the Printhead.
•
• The number reads R=XXXX.
July 2013
© 2012, 2013 HID Global Corporation. All rights reserved.
Page 23 of 101