3.7.6
Transfer Top Of Form
Figure 8 - Transfer Top of Form
Step
Procedure
1
Print the alignment card self-test.
2
Adjust the Transfer Top of Form value until the TOF Zero Line is located on the card edge as shown.
3.7.7
Transfer End of Form
Figure 9 - Transfer End of Form
Step
Procedure
1
Print the alignment card self-test.
2
Adjust the Transfer End of Form value until the EOF Zero Line is located on the card edge as shown.
3.7.8
Page 28 of 101
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
© 2012, 2013 HID Global Corporation. All rights reserved
July 2013