2. ADF Mechanism Test
1. Enter the test mode. See page 2-22.
2. Place a document in the ADF.
3. From the test mode menu, press 1. The document will be fed.
3. DTMF Tone Test
1.
Enter the test mode. See page 2-22.
From the test mode menu, press 2.
2.
3.
Either:
To test a dual tone, press 1. Go to step 4.
To test a single tone, press 2. Go to step 7.
Press the key corresponding to the tone you want to test (0 to 9, #, or *). Then press Start.
4.
5.
Press Stop when you have finished with the tone.
6.
Either:
To test another dual tone, go to step 4.
Press Stop to return to standby.
Continued on the next page
2-24