Table of Contents
Advertisement
2. Others
1. Keystroke Programs
To store a program, do the following.
1.
Place a document in the feeder (unless you are programming a polling reception program).
2.
Select all required features (such as Confidential), and remote terminal numbers as normal.
3.
Press the Quick Dial key that you wish to store the program in. Do not press a key that already has a num-
ber or program stored in it.
4.
Press Yes, then press Stop.
2. Voice Message (FAX80/85 only)
The voice message is used to warn a caller from a telephone that they have connected to a fax.
- Recording a Voice Message -
Press Voice Message. Then press 1. Press Start when you are ready to record. Speak into the microphone
on the operation panel. Press Stop when you have finished.
2-10
Advertisement
Table of Contents
Troubleshooting
