Ricoh FACSIMILE FAX77 Field Service Manual page 37

Function
No
57 Authorized reception on/off
58 Forwarding on/off (FAX85 only)
59 Substitute reception on/off (FAX80
only)
60 Programming Quick Dial and Speed
Dial
61 Programming Group Dial
Details
Authorized reception restricts the machines that can
send fax messages to this machine. The acceptable
senders are programmed using Function 85. This is
a good way to prevent junk fax mail. Press 1 to turn it
on, or 2 to turn it off.
Forwarding sends any received messages (except
substitute or confidential receptions) on to another
terminal. Press 1 to turn it on, or 2 to turn it off.
If your printer is out of paper or jammed and you are
expecting a message longer than about 9 pages, you
can turn off substitute reception and ask the other
end to resend the message. Press 1 to turn it on, or
2 to turn it off. If it is switched on, ECM is automat-
ically switched off.
Press the key or enter the code that you want to pro-
gram. Then enter the number, then press Yes. Each
Quick Dial Key can have either a) a remote fax num-
ber and a remote telephone number b) a keystroke
program and a remote telephone number. Each
Quick Dial Key can also have a label.
Enter the Group number that you want to program.
Give it a label. Then store the required numbers in
the group. (To store a Speed Dial Code, press Speed
Dial then enter the code, then press Yes. To store a
Quick Dial Key, press the key then Yes.)
2-6