Ricoh FACSIMILE FAX77 Field Service Manual page 92

Bit Switch 12
BIT FUNCTION
ADF or cutter test
0
mode
1 Not used
2 Dialing on the
operation panel
when the handset
picked up and a
document is in the
feeder
3 Quick Dial Label
display during dial- 1: Disabled
ing
4
Use of Stop key
when dialing on the 1: Disabled
machine's opera-
tion panel with the
handset picked up
Continued on the next page.
DATA
1: Enabled
0: Enabled
1: Disabled
0: Enabled
0: Enabled
To test the ADF, place a document in the feeder and press
Copy. The document will be fed through the scanner.
To test the cutter, press the Copy key without placing a docu-
ment in the ADF. The printer will feed a small amount of paper
and cut it off.
Do not change the factory setting.
0: If the user picks up the handset, then dials using the
machine's operation panel and connects with the oter end,
and if the user then presses keys on the operation panel
during communication, dial tones will be sent through to the
other end.
0: The label programmed into the quick dial key will be shown
on the LCD during dialing.
0: If Stop key is pressed, the machine immediately stops dial-
ing.
1: If Stop key is pressed, the machine stops at the end of dial-
ing.
2-61
COMMENTS