Ricoh FACSIMILE FAX77 Field Service Manual page 87

Bit Switch E
BIT FUNCTION
0 Function 59
(Substitute recep- 1: Disabled
tion on/of)
1 Function 84
(Confidential
password)
2 Functions 58 and
86 (Forwarding)
3 CSI programming 0: User level
(Function 65)
4 Telephone line type 0: User level
(Function 81)
Closed network (rx 0: Disabled
5
mode only) based
on reception of RTI
or CSI
6 Closed network (rx 0: Disabled
mode) based on
Polling ID
7
Closed network (tx 0: Disabled
mode) based on
Polling ID
DATA
0: Enabled
0: Enabled
1: Disabled
0: Enabled
1: Disabled
1: Service level
1: Service level
1: Enabled
1: Enabled
1: Enabled
1: Function 59 cannot be used.
1: Function 84 cannot be used.
1: Functions 58 and 86 cannot be used.
If this bit is 1, the machine will not receive from a machine that
does not send an RTI or CSI to identify itself. This way, the
user will always be able to tell who sends messages.
If this bit is 1, the machine will not receive from a machine that
has a different Polling ID code. This function is not reliable
when communicating with a non-Ricoh machine.
If this bit is 1, the machine will not send to a machine that has
a different Polling ID code. This function is not reliable when
communicating with a non-Ricoh machine.
2-56
COMMENTS