Ricoh FACSIMILE FAX77 Field Service Manual page 94

Bit Switch 13
BIT FUNCTION
Not used
0
1
2 Not used
Halftone dither
3
matrix
4 Smoothing of
received images
Near-end indication 0: Enabled
5
6 Action when copy
count reaches 30
in copy mode
7 Result report
DATA
0: 64 level matrix
1: 16 level matrix
0: Disabled
1: Enabled
1: Disabled
0: Machine stops for 40 Continuous copying could cause thermal head burnout, so
s after every page
1: Machine continues
copying normally
0: Enabled
1: Disabled
Do not change the factory settings.
Do not change the factory setting.
The software contains two different dither matrixes for halftone
processing. This bit determines which one is used.
If this is 1, faxes received in standard mode will be smoothed
to detail mode before printout. Faxes received in detail mode
will be smoothed to fine mode if the tx side indicates that the
message was scanned using fine mode, even if this bit is 0.
The machine tells how much paper is left on a roll by counting
how much paper is used up. When 90% of the roll has been
used, the Replace Paper indicator blinks to warn the user that
the roll is almost empty. If this bit is 1, this function is disabled.
this bit should be kept at 0. This bit is not effective for recep-
tion.
0: A Polling File List or Memory Transmission Report is printed
whether the communication was successful or not.
1: When polling or memory transmission has been completed
successfully, no Polling File List or Memory Transmission
Report is printed. However, the report is printed if the com-
munication failed.
2-63
COMMENTS