Ricoh FACSIMILE FAX77 Field Service Manual page 86

Bit Switch D
FUNCTION
BIT
0 TTI date and time
transmission
1 TTl transmission
2 TTl page number
transmission
3 TTI print start posi- 0: 24 mm [1"]
tion
4 TTl in copy mode
5 Page numbering in 0: Enabled
multicopy mode
6 Not used
7 Reduction override 0: Disabled
prompt
DATA
0: Enabled
1: Disabled
0: Enabled
1: Disabled
0: Enabled
1: Disabled
1: 48 mm [2"]
0: Not used 1: Used
1: Disabled
1: Enabled
If this bit is 0, the date and time will be printed on the pages at
the other end, (and in copy mode if bit 4 is 1).
If this bit is 0, the TTI will be printed at the top of pages sent to
the other end (and in copy mode if bit 4 is 1).
If this bit is 0, pages sent to the other end will have a page
number on the top right of the page. (So will copies if bit 4 is
1.)
The setting determines the distance of the time/date informa-
tion from the scan start position.
0: The copy will be a faithful reproduction of the original.
1: The machine will print the TTl at the top of copies made in
copy mode.
0: Page numbers will be printed on copies made using multi-
copy mode.
Do not change the factory setting.
This is for use in W. Germany (FTZ requirement). If this bit is
1, the machine will ask the user before sending a document
whether auto-reduction is acceptable.
2-55
COMMENTS