Ricoh FACSIMILE FAX77 Field Service Manual page 68

Bit Switch 1
BIT FUNCTION
Default reception mode
0 Bit 1 Bit 0 Setting
0 0 Manual
1 0 1 Not Used
1 0
Automatic
1 1 Automatic
Default resolution
2 Bit 3 Bit 2 Setting
0 0 Standard
Detail
3 0 1
1 0 Fine
1 1 Fine
Default contrast
4 Bit 5 Bit 4 Setting
0 0 Normal
Lighten
5 0 1
1 0 Darken
1 1
Darken
6 Halftone default set- 0: Off 1: On
ting
7 Not used
DATA
These bits state the default reception mode setting. The recep-
tion mode returns to this setting when power is switched on.
These bits state the default resolution setting. The machine's
resolution returns to this setting when power is switched on
and when the machine returns to standby after transmission.
These bits state the default contrast setting. The machine's
contrast returns to this setting when power is switched on and
when the machine returns to standby after transmission.
1: Halftone will be enabled when the machine is in standby
mode. The user must press the Halftone key to switch
halftone off if halftone mode is not required.
Do not change the factory setting.
2-37
COMMENTS