3-2-6. Xenon Lamp Driver
1. Remove the top cover (see section 3-1-1).
2. Remove the xenon lamp driver [A] (3
screws, 2 connectors).
3-2-7. SBU
1.
Remove the top cover (see section 3-1-1).
2.
Remove the SBU cover [A] (2 screws).
3.
Remove the SBU [B] (2 screws, 1 connec-
tor).
4.
After installing a new SBU, do the adjust-
ments on the following pages.
3-12