Ricoh FACSIMILE FAX77 Field Service Manual page 97

Switch 15
Bit
BIT FUNCTION
o
Action if wrong
password is
entered when print- printed
ing a confidential
file (FAX85 only)
Remaining memory O: % 1: S
space display units
2 Katakana charac-
ters
3 Not used
4 Not used
5 Not used
6 Error code listing
on error reports
7 Protocol dump list
output
Switches 16
Bit
DATA
O: Nothing is printed
1: The first page is
0: Enabled
1: Disabled
O: Disabled
1: Enabled
O: Disabied
1: Enabled
are not used in this machine.
F
O: Nothing is printed if the user enters the wrong password
when trying to print a confidential file with Function 76.
1: If the user enters the wrong password, only the first page
will be printed. This could only be useful if the first page of
received fax messages is always a cover sheet, informing of
who the sender is and who the fax is intended for; that person
can then be informed that a confidential message has arrived.
O: lhe remaining memory space is displayed as a percentage.
1: The approximate number of pages that can be stored in the
remaining memory is displayed.
If a customer requires Japanese Katakana characters, set this
bit to O.
Do not change the factory setting.
Do not change the factory setting.
Do not change the factory settincj
If this bit is 1, error codes will not be printed on error reports.
To see the error codes, use sewice function 94 (Service
Report or Error Code Display).
This is only used for communication troubleshooting. It shows
the content of the transmitted facsimile protocol signals. Al-
ways reset this bit to O after finishing testing.
2-66
COMMENTS