Placing Originals In The Adf - Ricoh 4410L Operating Instructions Manual

Faxing

Placing Originals in the ADF

Use the ADF to scan a stack of origi-
nals in one operation. The ADF can
handle one-sided originals.
Note
2
❒ The maximum original length is
600 mm (23.7") with manual assist-
ance.
❒ Place all the originals to be
scanned in a single stack.
❒ When scanning two-sided origi-
nals, use the duplex original func-
tion. See p.56 "Duplex Original
Settings", Advanced Features .
❒ When you want to place originals
for a transmission individually or
more than two times, use the Batch
Original Documents Transmission
function. See p.57 "Batch Original
Documents Transmission", Ad-
vanced Features .
❒ Do not open the ADF while it is
scanning the originals or an origi-
nal could become jammed.
❒ If an original jams, press the
{ { { { Clear/Stop} } } } key, and then remove
the original carefully.
❒ The maximum number of originals
you can place in the ADF is 70
sheets for A4 and 8
sheets for 8
❒ If your original is bent or folded,
flatten it before you place it.
Reference
For information about the sizes
and number of originals that can
be placed in the ADF, see p.207
"Acceptable Types of Originals",
Advanced Features .
32
1
/ " x 11", 30
2
1
/ "x14" size originals.
2
A A A A
Adjust the original guide to
match the size of your originals.
Align the edges of your originals
and stack them in the ADF face
up. Adjust the original guide to
match the size of the originals
again.
Note
❒ Place the originals gently.