Ricoh FACSIMILE FAX77 Field Service Manual page 35

16. Quick Dial Keys
You can program each of these keys to dial a num-
ber, or enter a set of numbers and features, with just
one touch. You can also use these keys to input and
edit labels such as the RTI.
17. Manual Document Feed Button
If you wish to feed thinner or thicker documents than
usual, press this button while feeding in the docu-
ment.
18. Speed Dial Key
Press this key to change the mode of the ten key pad
and use a Speed Dial Code.
19. Voice Request Indicator and Key
Press this key during communication if you want to
talk to the other end. If On Hook Dial is enabled by bit
switch, press this key to use the On Hook Dial Fea-
ture.
20. Pause/Redial Key
When entering a telephone number at the ten key
pad, press this key when you need to enter a pause.
Also, press this key when you wish to redial one of
the last ten numbers that were dialled.
21. Tone Key
Use this key to gain access to remote facilities, such
as banking services.
22. Clear Key
This is used during programming to shift the cursor
or to clear the last character entered, depending on
the mode in use.
23. Ten Key Pad
Acts as a telephone ten-key pad. Also used for enter-
ing other numbers, such as Speed Dial Codes.
24. Stop Key
Press to stop the machine during communication and
return it to standby.
25. Copy Key
Press to copy the document that is now in the feeder.
26. Start Key
Press to start transmission
27. Microphone (FAX80/85 only)
Speak into this microphone when you record a voice
message.
2-4