Ricoh FACSIMILE FAX77 Field Service Manual page 99

No Description
10 Pulse dial relay (PC2) make time
11 Time between the final closure of the
Di relay and the opening of the Ds
relay (Europe/Asia only)
12 Pause between dialled digits (pulse
dial mode)
13 Time waited when a pause is
entered at the operation panel
14 DTMF tone length
15 Time between dial digits (DTMF dial
mode)
16 DTMF tone transmission level
Notes
1. Pulse dial timing parameters (08 to 12) are the values for a dial rate of 10 pps. If 20 pps is used, the
machine adjusts these parameters; times for parameters 08 to 11 will be half those for 10 pps, and the
time for parameter 12 will be 3/4 of that for 10 pps.
2. The cpu may not detect the first ring until parameter 05 + ringing signal wavelength x (1 to 2.5).
3. N must be between 0 and 15.
Formula
N (ms)
N (ms)
N x 20 (ms)
N x 20 (ms)
N (ms)
N (ms)
3-N (dBm)
2-68
Remarks
Note 1
Note 1
Note 1
Note 3