Ricoh FACSIMILE FAX77 Field Service Manual page 116

Free the xenon lamp harness from the har-
6.
ness clamps and remove the harness
holder plate [D] (2 screws).
Remove the xenon lamp [E] (1 connec-
7.
tor).
Reassembly
Test the new xenon lamp before reassem-
•
bling the machine.
• Clean the exposure glass with a soft cloth
before putting it back. Do not get
fingerprints on the exposure glass.
Check the tx motor timing belt tensions
•
after reassembling the machine (see page
3-9).
3-11