Table of Contents
Advertisement
Check Figure 6–1 for the LED state displayed on the processor card and
memory card and details of what to do next.
Figure 6–1 Processor Card and Memory Card LED States
LEDs
State
READY
Card
waiting or
(No LEDs lit)
disabled
Testing in
progress
Flashing
(1 flash per second)
FAULT
Action
The module self-test was successful and the
card is running.
Follow the procedures in Section 6.11.
Possible causes:
– The card is waiting to run its module self-test.
See Section 6.10.
– The card is not installed correctly.
See Section 6.12.
– There is a fault on the card or with the slot.
See Section 6.12.
The module self-test is running on the
card.
The module self-test has failed.
Follow the procedures in Section 6.12.
Installing Upgraded Processor or Memory Cards 6–15
LKG–5670–91I
Advertisement
Table of Contents
