Table of Contents
Advertisement
Figure A–2 System Operation Display Codes
Display Code
Description
The upper display shows a system self-test display
code.
The value 0 in the lower display indicates that there
are no load circuits available for the DECNIS 600.
The upper display shows a system self-test display
code.
The value 1 in the lower display indicates that the
DECNIS 600 is requesting a load from a specific
load host. A request is always made to the host
that last provided the load before it is broadcast on
all circuits.
The upper display shows a system self-test display
code.
The value 2 in the lower display indicates that the
DECNIS 600 has located a load host and is loading
the software. This code is displayed while the load
is taking place.
The upper display shows a system self-test display
code.
The value 3 in the lower display indicates that the
DECNIS 600 is waiting before it sends another load
request so that it avoids congestion at the load
host. The load request will be re-issued in a few
seconds.
The upper display shows a system self-test display
code.
The value 4 in the lower display indicates that the
software is loaded. This value is displayed for a
few seconds before the circling pattern indicates
that the software is running.
LKG–5701–91I
(continued on next page)
A–4 Display Codes
Advertisement
Table of Contents
