Disable The Network Interface Card - DEC 600 Installation And Service Manual

7.4 Disable the Network Interface Card

1. Move the
switch down
2. Wait for
HOTSWAP
LED to light
7.5 Detach the Communications Cables
When the HOTSWAP LED is lit, you can remove all cables connected to
the Network Interface Card ports. Follow the procedures on the Cabling
Instructions and Specifications card for the Network Interface Card.
Note that if the Network Interface Card has a separate distribution panel, you
must also remove the cables from the panel. See the Cabling Instructions and
Specifications card for more information.
Removing Network Interface Cards 7–3
LKG–5672-91I