Tasks - DEC 600 Installation And Service Manual

This chapter describes how to remove the DECNIS 600 system from its rack.

8.1 Tasks

Complete the procedures in Sections 8.2 to 8.6 to:
1. Prepare to remove the system
2. Power down the system
3. Support the system and remove the screws
4. Remove the system
5. Replace the system in its packaging
8.2 Preparation
The maximum weight of the DECNIS 600 is 40 kg (88 lb). At least two people
are required to lift it out of the rack. Each person must be competent and
satisfied that they are able to lift their share of the weight.
You will need the following screwdriver to remove a system installed with the
supplied fittings:
• A Number 1 or Number 2 crosspoint screwdriver
Removing the System
Removing the System 8–1
8