6.2 Preparation
Remove the cardboard packaging from the processor card or the memory card.
Do not remove the card from its antistatic packaging until you have
completed the procedures in Section 6.4. The packaging protects the
card from damage caused by static discharge.
When you unpack the kit, keep all of the card packaging in case you need to
remove and replace the card.
6.2.1 Tools
Make sure you have the following available:
•
Antistatic kit that includes an antistatic wrist strap and antistatic mat
1
•
A 3 mm (
8
6.2.2 Card Position
The processor card and the memory card must be installed in slots 1 or 2.
6–2 Installing Upgraded Processor or Memory Cards
Note
in) flat blade screwdriver