Table of Contents
Advertisement
Figure A–3 Module LED States
Card LEDs
State
No LEDs lit
Testing in
progress
(flashing)
Loading
(flicker)
READY
FAULT
ATTENTION
HOTSWAP
Description
Card is disabled. Possible causes:
– No power to unit
– Card is waiting to run module self-test
(memory card only)
– Card is not installed correctly
– Fault on card or in slot
Module self-test is running on the card
(1 flash per second).
NIC is either waiting to load or loading the
software.
The card has passed its module self-test.
The module self-test has failed. Possible
causes:
– Fault on card
– Cabling problem
– Fault on DECNIS 600 unit
The NIC is running, but not all ports on
the card are usable. Possible causes:
– Fault on NIC
– Cabling problem
– Fault on DECNIS 600 unit
The NIC switch is down (NIC disabled)
and the NIC can be removed from the
system.
LKG–5703–91I
Display Codes A–7
Advertisement
Table of Contents
