Table of Contents
Advertisement
Structure
This manual is divided into four parts:
•
Part I contains all of the information that you need to install the DECNIS
600:
–
Chapter 1 describes the preparations you need to make before
installing the DECNIS 600 unit.
–
Chapter 2 shows how to install the DECNIS 600.
–
Chapter 3 shows how to install Network Interface Cards into a system
that is powered down.
–
Chapter 4 shows how to power up and test the installed system.
•
Part II shows you how to upgrade and remove the system:
–
Chapter 5 shows how to install additional Network Interface Cards
without powering down the system.
–
Chapter 6 shows how to install a processor card and a memory card.
–
Chapter 7 shows how to remove Network Interface Cards from the
system.
–
Chapter 8 shows how to remove the DECNIS 600 unit.
•
Part III contains information that you need for solving DECNIS 600
hardware problems:
–
Chapter 9 describes how to identify a problem.
–
Chapter 10 describes how to locate a faulty component in the system.
–
Chapter 11 describes how to replace the faulty component.
•
Part IV contains DECNIS 600 reference information:
–
Appendix A describes the displays and codes shown on the DECNIS
600.
–
Appendix B specifies the electrical, environmental, and physical
requirements of the DECNIS 600.
–
Appendix C describes DECNIS 600 specifications for installations in
the United Kingdom.
–
Appendix D shows how to dump the system.
xii
Advertisement
Table of Contents
