Tasks - DEC 600 Installation And Service Manual

6
Installing Upgraded Processor or Memory
Cards
This chapter describes how to remove the processor card and memory card and
install new cards into the DECNIS 600 unit.

6.1 Tasks

Complete the procedures in Sections 6.2 to 6.11 to:
1. Prepare for the installation
2. Power down the system
3. Attach the static protection equipment
4. Remove the protective cover
5. Remove the processor card or memory card
6. Install the new processor card or memory card
7. Replace the protective cover
8. Power up the system
9. Monitor the card displays
10. Monitor the system displays
Installing Upgraded Processor or Memory Cards 6–1