Tools; People - DEC 600 Installation And Service Manual

1.5 Tools

Make sure you have the following equipment available:
• Template
The template is supplied with the DECNIS 600 kit. The markings on the
template correspond to the metric and imperial fixing holes on the DECNIS
600 unit and on the support brackets.
• Support brackets
Support brackets are supplied with the DECNIS 600 kit. These brackets
will fit all racks with front and rear vertical mounting rails that are
at least 47.63 cm (18.75 in) and no more than 80 cm (31.5 in) apart.
Section 2.4 describes how to fit the support brackets.
• Screwdrivers
You need the following screwdrivers for the DECNIS 600 installation:
• A Number 1 or Number 2 crosspoint screwdriver
• A 3 mm (

1.6 People

At least two people are required to lift the DECNIS 600 from its packaging
and into the rack.
The maximum weight of the DECNIS 600 with each slot occupied is
40 kg (88 lb). Each person must be capable and satisfied that they are
able to lift their share of the weight.
1
in) flat blade screwdriver
8
Preparing to Install the System 1–5