Safety Notes; Laws And Directives - Siemens SITRANS FC410 Operating Instructions Manual

Safety notes

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
Symbol
2.1

Laws and directives

Observe the test certification, provisions and laws applicable in your country during
connection, assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
● IEC 60079-14 (international)
● EN 60079-14 (EC)
Conformity with European directives
The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic compatibili-
ty EMC
2004/108/EC
Low voltage directive LVD
2006/95/EC
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
Explanation
Consult operating instructions
Directive of the European Parliament and of the Council on the
approximation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive
89/336/EEC.
Directive of the European Parliament and of the Council on the
harmonisation of the laws of Member States relating to electri-
cal equipment designed for use within certain voltage limits.
2
15