Siemens SITRANS FC410 Operating Instructions Manual page 108

Technical data
11.14 PED
Group 2 fluids
All fluids not belonging to Group 1.
Also applies to fluids which are for example dangerous to the environment, corrosive,
dangerous to health, irritant or carcinogenic (if not highly toxic).
Conformity assessment
Flowmeters of categories I to III comply with the safety requirements of the directive. They
are affixed with the CE mark and an EC declaration of conformity is provided.
The flowmeters are subjected to the conformity assessment procedure - Module H.
Flowmeters according to Article 3 Paragraph 3 are designed and manufactured in
accordance with sound engineering practice in Denmark. PED conformity reference is not
affixed to the CE mark.
Diagrams
● Gases of fluid group 1
● Pipelines according to Article 3 Number 1.3 Letter a) First dash
● Exception: unstable gases belonging to Categories I and II must be included in Category
III.
Image 11-3
● Gases of fluid group 2
● Pipelines according to Article 3 Number 1.3 Letter a) Second dash
106
Diagram 6
Operating Instructions, 02/2016, A5E33120874-AC
FC410 with Modbus