– Click OK.
3. Set up the COM interface:
– Select Modbus Networks.
– Right-click on the object name SITRANS FC410 and select Object Properties.
– Select the Communication tab and configure the Modbus address.
– Click OK.
6.8
Configuring a new device
Note
Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters NOT being updated.
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
Image 6-2
Modbus net object properties
Image 6-3
Set the Modbus address
Commissioning
6.8 Configuring a new device
55