Transportation And Storage; Device Disposal - Siemens SITRANS FC410 Operating Instructions Manual

There you will find:
● The latest product information, FAQs, downloads, tips and tricks.
● Our newsletter, providing you with the latest information about your products.
● Our bulletin board, where users and specialists share their knowledge worldwide.
● You can find your local contact partner for Industry Automation and Drives Technologies
in our partner database.
● Information about field service, repairs, spare parts and lots more under Services.
Additional Support
If you have additional questions about the device, please contact your local Siemens
representative and offices at:
Technical support (http://support.automation.siemens.com/WW/view/en/16604318)
9.6

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
Special conditions for storage and transportation of the device are listed in Technical data
(Page 91).
9.7

Device disposal

FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
Devices identified by this symbol may not be disposed of in the
municipal waste disposal services under observance of the
Directive 2002/96/EC on waste electronic and electrical
equipment (WEEE).
They can be returned to the supplier within the EC or to a local-
ly approved disposal service. Observe the specific regulations
valid in your country.
Service and maintenance
9.6 Transportation and storage
83