Simulation; A.3.8 Simulation - Siemens SITRANS FC410 Operating Instructions Manual

A.3.8

Simulation

Table A- 18 Simulation
Modbus Data type /
address Size [bytes]
2764 Float / 4
2766 Float / 4
2768 Float / 4
2770 Float / 4
2772 Float / 4
2780 Unsigned /
2
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
Parameter Description
Massflow Simulation Set massflow simulation
Value value.
The massflow will be set to
this value on all outputs, if
Simulation Mass Flow is
enabled
Density Simulation Set density simulation
Value value.
The density will be set to
this value on all outputs, if
Simulation Density is
enabled
Tube Temperature Set tube temperature
Simulation Value simulation value.
The tube temperature will
be set to this value on all
outputs if Simulation Tube
Temperature is enabled
Frame Temperature Set frame temperature
Simulation Value simulation value.
The frame temperature will
be set to this value on all
outputs if Simulation Frame
Temperature is enabled
Volumeflow Set volume flow simulation
Simulation Value value.
The volume flow will be set
to this value on all outputs,
if Simulation Volume Flow is
enabled
Enable Simulation Activate simulation.
Select one of the following
values:
•
•
•
•
•
Bit 0: Massflow
Bit 1: Density
Bit 2: Volumeflow
Bit 3: Tube temperature
Bit 4: Frame tempera-
ture
Modbus holding registers
A.3 Modbus holding registers tables
Default value Value range Access
[unit]
0 [kg/s] -1023 to
+1023
1000 [kg/m ] -20000 to
3
+20000
0 [°C] -50 to +200
0 [°C] -50 to +200
m /s -65 to +65
3
0 0 to 63
level
Read /
Write
Read /
Write
Read /
Write
Read /
Write
Read /
Write
Read /
Write
135