Recalibration; Technical Support - Siemens SITRANS FC410 Operating Instructions Manual

Service and maintenance

9.4 Recalibration

● Process Media Temperature
● Zero Point Adjustment Auto/Manual
● Zero Point Offset Value
● Manual Zero Point
● Zero Point Standard Deviation
9.4 Recalibration
Siemens A/S, Flow Instruments offers to recalibrate the sensor at our works in Denmark.
The following calibration types are offered as standard according to configuration:
● Standard calibration
● Density calibration
Note
SensorFlash
For sensor recalibration the SensorFlash memory unit must always be returned with the
sensor.
9.5

Technical support

If you have any technical questions about the device described in these Operating
Instructions and do not find the right answers, you can contact Customer Support:
● Via the Internet using the Support Request:
● Via Phone:
– Europe: +49 (0)911 895 7222
– America: +1 423 262 5710
– Asia-Pacific: +86 10 6475 7575
Further information about our technical support is available on the Internet at
Local contact person (http://www.automation.siemens.com/partner)
Service & Support on the Internet
In addition to our documentation, we offer a comprehensive knowledge base online on the
Internet at:
Service and support (http://www.siemens.com/automation/service&support)
82
Support request (http://www.siemens.com/automation/support-request)
Operating Instructions, 02/2016, A5E33120874-AC
FC410 with Modbus