Siemens SITRANS FC410 Operating Instructions Manual page 38

Installing/Mounting
4.1 Flowmeter installation
4. Make sure that the pressure guard does NOT touch any of the parts inside the sensor.
Maximum of 20 mm (0.79") insertion can be accommodated.
5. Check that the pressure guard has been correctly mounted and thoroughly tightened
(torque: 80 Nm).
36
WARNING
Operation in proximity with pressure guards
Prevent personal injuries by assuring that operation in close proximity with pressure
guards cannot take place.
Operating Instructions, 02/2016, A5E33120874-AC
FC410 with Modbus