Introduction
These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
The contents of this manual shall not become part of or modify any prior or existing
agreement, commitment or legal relationship. The sales contract contains all obligations on
the part of Siemens as well as the complete and solely applicable warranty conditions. Any
statements regarding device versions described in the manual do not create new warranties
or modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right
to make technical changes in the course of further development.
1.1
History
The following table shows major changes in the documentation compared to the previous
edition.
Edition
Remarks
12/2013
First edition
•
05/2015
Update of SIMATIC PDM ver. 8
•
Update of Modbus holding registers:
•
Modbus address 2215 to 2218 added.
02/2016
EAC Ex declaration information added
•
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
SW version
SIMATIC PDM driver 1.00.01-01
•
SIMATIC PDM driver 1.01.00-00
•
SIMATIC PDM driver 1.01.00-00
•
1
FW revision
2.03.02-01
2.03.03-01
2.03.03-01
7