Siemens SITRANS FC410 Operating Instructions Manual page 15

Note
Logos and warnings
Logos and warnings are only shown on the product where applicable. The combination
shown in the example above is relevant for a hygienic sensor.
The Australian C-tick mark is mandatory on all products.
FC410 EHEDG nameplate
Image 1-5
This nameplate appears on all Hygienic sensors 7ME462.
Other label
Image 1-6
The QR code provides direct internet connection to
● The product support portal, which includes access to the How to Install YouTube video.
(This example provides that function.)
● Product and production-specific documentation maintained in the production database.
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
EHEDG nameplate
How to install
Introduction
1.4 Device identification
13