Boot - DFI WM343-KD330 User Manual

Boot

This section configures boot options.
Numlock
Select the power-on state for the Num Lock key.
Boot Type
Select the boot type. The options are Dual Boot, Legacy Boot and UEFI Boot Type.
Network Stack
This option is shown only when the boot type is set to Dual or UEFI.
Enable or disable UEFI network stack. It supports the operation of these functions or soft-
ware: Windows 8 BitLocker Network Unlock, UEFI IPv4/IPv6 PXE and legacy PXE option ROM.
If this function is enabled, you can then go to "Advanced">"Device Manager" to configure
network settings for network connection under the UEFI environment.
PXE Boot Capability (UEFI mode) /PXE Boot to LAN (Legacy mode)
Enable or disable Preboot eXecution Environment (PXE) boot to LAN. In the UEFI or Dual boot
mode, this function can only be enabled if the Network Stack support is enabled.
USB Boot
Enable or disable booting to USB boot devices.
Quiet Boot
Enable or disable the quiet boot function to configure the screen's display between
POST messages or the OEM logo at bootup. Select Disabled to display the POST messages
and select Enabled to display the OEM logo.
Chapter 7 BIOS Setup
Chapter 7
Boot Device Priority
This section configures legacy or EFI boot order or both depending on the "Boot Type" selected.
EFI Boot Menu
Use + and - keys to arrange the priority of the boot devices in the list.
Legacy Boot Menu
Normal
For this option, determine the boot order for the devices within each category. Use the
+ and - key to arrange the priority of the boot type devices in the list. The first device
in the list has the highest boot priority.
Advance
For this option, determine the boot order for all bootable devices. Use + and - keys to
arrange the priority of the detected boot devices in the list. The first device in the list
has the highest boot priority.
61
www.dfi.com