Boot; Save & Exit - DFI RC300H-CS111 User Manual

Boot

Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Setup Prompt Timeout
Set the number of seconds to wait for the setup activation key. 65535 (0xFFFF)
denotes indefinite waiting.
Bootup NumLock State
Select the keyboard NumLock state: On or Off.
Quiet Boot
This section is used to enable or disable quiet boot option.
Boot Option Priorities
Select the system boot order.
BGRT Logo
It is used to enable or disable to support display logo with ACPI BGRT table.
Driver Option Priorities
Select the driver boot order.
RC300-CS
Save & Exit
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will
appear. Select Yes to reset the system after saving all changes made.
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box
will appear. Select Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press
<Enter>. A dialog box will appear. Select Yes to restore the default values.
Boot Override
Move the cursor to an available boot device and press Enter, the system will im-
mediately boot from the boot device. This function will only be effective for the
current boot. The "Boot Option Priorities" in the Boot menu will not be changed.
Save Setting to file
Select this option to save BIOS configuration settings to a USB flash device.
Restore Setting from file
This field will appear only when a USB flash device is detected. Select this field
to restore setting from the USB flash device.
55
www.dfi.com