Chapter 2 - Getting Started
Preparing the System
Before you start using the system, you need the following items:
•
Storage Device : 2.5" HDD/SSD (SATA) or M.2 2280 SSD (SATA or PCIe)
•
AC power adapter
•
Screwdriver
•
Memory modules
Installing Devices
The following devices can be installed in the system.
•
Memory module(s)
•
Storage Device
Configuring the BIOS
To get you started, you may need to change configurations such as the date, time and the
type of hard disk drive.
1.
Power on the system.
2.
After the memory test, the message "Press DEL to run setup" will appear on the screen.
Press the Delete key to enter the BIOS setup utility.
Installing the Operating System
Depending on the method you choose to install your system, you may use a USB flash drive.
Make sure that a storage device is already installed.
1.
Refer to the following chapters for information on installing a storage device
2.
Refer to your operating system manual for instructions on installing an operating system.
Installing the Drivers
Download the drivers and install.
ES220-CS
11
www.dfi.com