Symmetricom SSU-2000 User Manual page 287

Table 9-3. SSU-2000 System Components (Continued)
Item Description
40. I/O Cable, 50 pin 1 m
I/O Cable, 50 pin 1.1 m
I/O Cable, 50 pin 1.2 m
I/O Cable, 50 pin 1.3 m
I/O Cable, 50 pin 1.4 m
I/O Cable, 50 pin 1.5 m
I/O Cable, 50 pin 1.6 m
I/O Cable, 50 pin 1.7 m
I/O Cable, 50 pin 1.8 m
I/O Cable, 50 pin 1.9 m
I/O Cable, 50 pin 2 m
41. 805SCSI-TELCO
42. 805SCSI-TLCOR
43. Dual Cut-Through
Assembly
44. Quad Cut-Through
Assembly
45. Adapter Assembly
Output Panel – DE9
46. Adapter Assembly
Output Panel – 75 Ω
BNC
47. Adapter Assembly
Output Panel – 75 Ω
Siemens 1.6/5.6mm
48. SDU-2000
Synchronization
Distribution Unit
Expansion Shelf,
comes with D-clock
cable
12713020-002-2 Revision F.01 – January 2007
Part Number
060-10003-10-2 1. One cable (1 to 2 meters in length)
060-10003-11-2
060-10003-12-2
060-10003-13-2
060-10003-14-2
2. Same cables used for Main shelf and
060-10003-15-2
060-10003-16-2
060-10003-17-2
060-10003-18-2
060-10003-19-2
060-10003-19-2
Cable, 50-pin
SCSI to 50-pin
TELCO connector
Cable, 50-pin
SCSI, to 50-pin
TELCO connector
right angle
22013300-000-0 For use with the Dual DS1 Line Re-Timing
Module
22013300-001-0 For use with the Quad DS1 Line Re-Timing
Module
22013310-001-0 For use with the E1 Line Re-Timing Module
22013310-002-0 For use with the E1 Line Re-Timing Module
22013310-003-0 For use with the E1 Line Re-Timing Module
SDU-2000 Expansion Shelf
25413023-000-0 1. Up to 4 expansion shelves can be
2. Requires minimum of 1 Buffer module
3. Output modules interchangeable
4. Last Expansion shelf requires SDU
Chapter 9 Hardware Configuration Guide
SSU-2000 Configuration Chart
Notes
required for each Output module or
redundant pair of Output modules in the
system.
Expansion shelf.
attached to one SSU-2000 main shelf.
(2 recommended) and up to 14 Output
modules (no Input modules).
between Expansion shelf and Main shelf.
termination plug (shipped with Main
shelf).
SSU-2000 User's Guide 287