2A10
(09) PLL
2A10
(10) Configuration
2A10
(11) IntPortFlt
2A10
(13) Hdw Config
2A10
(14) Squelch Below Prov
SSU->
Provisioning the Squelch Parameter
To view or provision the squelch using ICS commands, see the OUTPUT command
description in the SSU-2000 Technical Reference. To provision the squelch using
TL1 commands, refer to the Set 2048 kHz Output Parameters section in the
SSU-2000 Technical Reference.
Status LED Indicators
The Output module status LED indicators are shown in
Table
8-16.
Figure 8-17. Front Panel of the 2048 kHz Output Module
12713020-002-2 Revision F.01 – January 2007
Chapter 8 Output Module Reference Data
Ok
Major
Ok
Major
Ok
Major
Ok
Major
Major
Figure 8-17
2048 kHz Output Module
00001
and described in
SSU-2000 User's Guide 237