Symmetricom SSU-2000 User Manual page 286

Chapter 9 Hardware Configuration Guide
SSU-2000 Configuration Chart
Table 9-3. SSU-2000 System Components (Continued)
Item Description
32. E1 Line Re-Timing
Module
33. SSU I/O Adapter Panel,
DS1 100/75 Ω Balun
Outputs, BNC
connectors
34. SSU I/O Adapter Panel,
DS1 120/75 Ω Balun
Outputs, Siemens
1.6/5.6 mm connectors
35. SSU I/O Adapter Panel,
DS1 120/75 Ω Balun
Outputs, Siemens
1.0/2.3 mm connectors
36. I/O Adapter Assembly,
9-pin D Outputs (DE9)
37. 100-Output (23-in)
High-Density Wire-wrap
Output Panel
38. 80-Output (19-in)
High-Density Wire-wrap
Output Panel
39. Adapter, 9-pin to
wire-wrap
286 SSU-2000 User's Guide
Part Number
23413309-000-0 1. Minimum of one Output module of any
2. The quad LRU provides retiming on four
3. A corresponding Adapter Assembly is
22013068-001-0 1. One adapter required per Output module
2. Requires separate I/O cable, 50 pin
3. Optional ears for 21-inch or 23-inch rack.
22013068-002-0 1. One adapter required per Output module
2. Requires separate I/O cable, 50 pin
3. Optional ears for 21-inch or 23-inch rack.
22013068-003-0 1. One adapter required per Output module
2. Requires separate I/O cable, 50 pin
3. Optional ears for 21-inch or 23-inch rack.
22013067-001-0 1. One adapter required per DS1 Output
2. Requires separate I/O cable, 50
3. Optional ears for 21-inch or 23-inch rack.
12813171-000-0 1. Includes SCSI cables for connection to
12813282-000-0 1. Includes SCSI cables for connection to
22013085-000-0 One DE9 I/O connector to wire-wrap
adapter for each DE9 I/O connector
(optional).
Notes
type required.
E1 lines to a Network Element.
required.
(or redundant pair of Output modules).
40
SCSI – see item .
(or redundant pair of Output modules).
40
SCSI – see item .
(or redundant pair of Output modules).
40
SCSI – see item .
module (or redundant pair Output
modules).
40
pin-SCSI – see item .
SSU-2000.
SSU-2000.
12713020-002-2 Revision F.01 – January 2007