Symmetricom SSU-2000 User Manual page 283

Table 9-3. SSU-2000 System Components (Continued)
Item Description
21. 4-Port SSU I/O Adapter
Panel
22. SCSI Cable, 1 m
Output Module, Output I/O Adapter Panels and Output Cables
23. E1 Output Module
24. DS1 Output Module
12713020-002-2 Revision F.01 – January 2007
Part Number
22013069-003-0 1. One adapter panel serves up to four
2. Each port has DE9 and Siemens 1.0/
3. Typically, 100 Ω termination for DS1
4. Includes SCSI cable for connection to
060-10003-10-2 Connects I/O Adapter to rear panel of the
shelf.
23413018-000-0 1. Minimum of one Output module of any
2. Each Output module provides 20 single
3. Each Output module or redundant pair
4. Each two redundant Output modules
23413017-000-0 1. Minimum of one Output module of any
2. Each Output module provides 20 single
3. Each Output module or redundant pair
4. Each two redundant Output modules
Chapter 9 Hardware Configuration Guide
SSU-2000 Configuration Chart
Notes
1-port Input modules.
2.3 mm connectors (switch selectable)
and selectable termination (50, 75, 100,
120 or 3.3 kΩ).
signals; 120 Ω for E1 signals; 50 and
75 Ω termination for 2,048 MHz or sine
wave signals.
SSU-2000.
type required.
output signals or 20 redundant signals
(if desired) in even/odd slots.
requires one Output I/O adapter panel.
require one Output Summer connector
(part number 22013070-000-0).
type required.
output signals or 20 redundant signals
(if desired) in even/odd slots.
requires one Output I/O adapter panel.
require one Output Summer connector
(part number 22013070-000-0).
SSU-2000 User's Guide 283