Symmetricom SSU-2000 User Manual page 104

CHpater 3 Provisioning and Operating the SSU-2000
Setting Security Parameters
Using TL1 Commands
1. Connect a computer to port 2000 on the SSU-2000 using the procedure in
Establishing a Connection With the
2. Press the ; key to ensure you have a connection. With an active connection, the
system responds:
M
;
3. Type
ACT-USER::username:123::pwd;
name and
SSU_2000 06-02-22 17:11:04
M
"\"PASSWORD EXPIRED AND NEED A NEW PASSWORD\""
;
4. Type
SET-USER:::123::PWD,username,pwd2;
name and
SSU_2000 06-02-22 17:11:57
M
"\"PASSWORD CONFIRMATION REQUIRED, SET-PWD-CONFIRM\""
;
5. Type
SET-PWD-CONFIRM:::123::pwd2;
following text appears followed by the system prompt, showing that you have
access to the system.
SSU_2000 06-02-22 17:12:18
M
"\"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\""
"\"NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM.
"\"UNAUTHORIZED ACCESS OR USE MAY LEAD TO PROSECUTION.\""
"\"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\""
;
SSU_2000 06-02-22 17:12:18
A
"S1A02:NA,194,NSA,06-02-22,17-12-18:\"Mod User, PWD, ADMIN,
TL1B\""
;
You need to store the new password in a safe location to prevent a service call to
Symmetricom Global Services.
104 SSU-2000 User's Guide
SSU_2000 06-02-21 21:14:19
0 DENY
IITA
is your password.
pwd
123 COMPLD
"\"CHANGE YOUR OWN PASSWORD\""
is the new password. The system responds with:
pwd2
123 COMPLD
123 COMPLD
000001 REPT EVT
SSU-2000, on page 90.
to log in, where
username
, where
username
to confirm the new password. The
12713020-002-2 Revision F.01 – January 2007
is your user
is your user
\""