Graphical User Interface; Overview Of Ssu-2000 Operation; Synchronization Status Messages (Ssms) - Symmetricom SSU-2000 User Manual

Synchronization supply unit and synchronization distribution unit
Hide thumbs Also See for SSU-2000:
Table of Contents

Advertisement

ICS also provides command sets to support all operation, administration,
maintenance, and provisioning tasks required to maintain and control an
SSU-2000e system from a terminal connected to one of the serial ports. ICS
commands are designed in a more readable interface for users, and includes an
instructional help facility. Refer to the SSU-2000 Technical Reference for more
information.

Graphical User Interface

Symmetricom's SynCraft application is a software interface program that is
available to provide local or remote monitoring and configuration functionality in a
Microsoft Windows graphical user interface. Contact your Symmetricom sales
representative for more information on the SynCraft Graphical User Interface, part
number 14113245-000-0.

Overview of SSU-2000 Operation

After initial installation and configuration is completed, the SSU-2000 is capable of
unattended operation. After power-up, where the external power supplies are turned
on so that they supply power to the main shelf, the SSU-2000 performs a
self-diagnostic test routine and properly initializes the hardware. Any active Alarms
are time tagged and reported as Events. All Events are time tagged and the last 500
Events are stored in NVRAM. All Events can be remotely accessed and cleared by
a user with the appropriate security level. Several optional levels of password
protection are available for system protection as described in
SSU-2000 Security
After the internal oscillators on any installed Clock modules have warmed up, the
SSU-2000 enters the ACQUIRE mode to phase lock the oscillators to the external
references. After the SSU-2000 reaches the LOCKED mode on at least one of the
Clock modules, any change of state is reported as an Event.

Synchronization Status Messages (SSMs)

The SSU-2000 supports input and output SSMs. SSMs provide a method for
providing clock quality information to any equipment that uses synchronization
inputs.
The SSU-2000 handles SSMs in accordance with T1X1.3 TR33, T1.101-1999,
GR-253, 379-CORE, and ITU-T G.781.
12713020-002-2 Revision F.01 – January 2007
System, on page 93.
Chapter 1 Product Overview
Overview of SSU-2000 Operation
Overview of the
SSU-2000 User's Guide
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdu-2000

Table of Contents