Ssu-2000 Configuration Chart - Symmetricom SSU-2000 User Manual

Chapter 9 Hardware Configuration Guide

SSU-2000 Configuration Chart

1. Log in to the SSU-2000 and press Enter. The system prompt appears.
2. Type
opermode normal
2002-08-15-T15:57:56Z ID: SSU2000 Name: SSU_2000
The SSU2000 is in Normal Mode
3. Type
bye
No hardware changes are necessary.
SSU-2000 Configuration Chart
A fully-populated SSU-2000 main shelf is shown in
I/O adapter panels used with the SSU-2000 input and output modules.
shows the SDU-2000 Synchronization Distribution Unit (output expansion shelf)
used with the SSU-2000.
provides the associated Symmetricom part numbers and provides other
configuration data required to procure a custom system.
278 SSU-2000 User's Guide
and press Enter. The system responds with:
and press Enter to log off.
Table 9-3
I/O Adapter for 3-Port DS1 or E1 Input Module
I/O Adapter for 1-Port DS1 or E1 Input Module
75 Ohm Balun I/O Adapter for DS1 or E1 Output Module
DE9 I/O Adapter for DS1 or E1 Output Module
Figure
contains a listing of all SSU-2000 components,
12713020-002-2 Revision F.01 – January 2007
1-1. Figure 9-4 shows the
Figure 9-5