Logging In To The Ssu-2000 - Symmetricom SSU-2000 User Manual

CHpater 3 Provisioning and Operating the SSU-2000
Setting Security Parameters

Logging In to the SSU-2000

Using ICS Commands
1. Connect a computer to a serial port on the SSU-2000 using the procedure in
Establishing a Connection With the
username appears.
2. Type your user name (or use
then press Enter. The system prompts for a password.
3. Type your password (or use
The following text appears followed by the system prompt, showing that you have
access to the system.
pSOSystem (172.16.21.19)
Username: ADMIN
Password:
Symmetricom Technical Support
1-888-367-7966 toll free USA
1-408-428-7907 worldwide
SSU_2000, 2006-02-23T21:49:32
14313012-005-5, F.00, 02FEB06
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM.
UNAUTHORIZED ACCESS OR USE MAY LEAD TO PROSECUTION.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SSU_2000->
Using TL1 Commands
1. Connect a computer to port 2000 on the SSU-2000 using the procedure in
Establishing a Connection With the
2. Press the ; key to ensure you have a connection. With an active connection, the
system responds with a DENY message:
M
;
3. Type
ACT-USER::username:123::pwd;
username
ACT-USER::admin:123::SSU-2000;
name and
by the system prompt, showing that you have access to the system.
102 SSU-2000 User's Guide
ADMIN
SSU-2000
SSU_2000 06-02-23 21:54:06
0 DENY
IITA
is your user name and
is the default password. The following text appears followed
SSU-2000
SSU_2000 06-02-23 21:54:35
SSU-2000, on page 90. A prompt to enter a
, the default Administrator-level user name)
, the default password) then press Enter.
DOY:54
SSU-2000, on page 90.
to log in to your account, where
is your password, or type
pwd
to log in, where
ADMIN
12713020-002-2 Revision F.01 – January 2007
is the default user